neocube Operating and installation instructions - models P/C

8. Commissioning certificate

Date:

Serial no.: (see type plate)

Installation company:

Has the actual sup- ply pressure been checked?

 Yes  No

Negative pressure greater than 20-25 Pa can influence correct operation. This can lead to soiling of the glass or to an increase in the generation of noise.

Test burning carried out:

 Yes  No

Wood-burning stove operator trained in operating and installing the stove, and operating instructions handed over: Signatures: Installer Stove fitter Operator Annual maintenance: Type of work Surname: Date: Signature:

Ä Ä Attention: : Keep in a safe place. Store the instructions together with their valid and clearly dated proof of purchase, and keep the documents ready for our installers in the event of any servicing work..

9. Operation and heating mode

Controlling the flow of air

Lever to the left

Primary and secondary air intake closed

Lever in the middle Primary air intake closed Secondary air intake open Lever to the right

Primary and secondary air intake closed

Lever to the left

Lever in the middleLever to the right

The primary air is used to regulate the supply of combustion air which is drawn from underneath, over the ash pan and grate towards the fuel. Therefore, you must make sure that the ash pan is never completely filled with ash, as the ash could block the influx of combustion air. The secondary air controls the quantity of air necessary to burn mainly the flammable products that are ge- nerated in the combustion compartment during the burning of wood. Some of the secondary air that flows from the top to the door minimizes soiling of the glass (cleaning of the door by air). As soon as the stove is heated up after starting the fire, close the primary air supply (lever in the middle).. When the oven is not in operation, position the lever to the left – primary and secondary air closed.

neocube P / C – Operating and installation instructions

32