neocube Operating and installation instructions - models P/C

6

OPTIONAL combustion air connection

Position the heating insert

If an external combustion air connection is required, this must be connected prior to final positioning of the heating insert.

Now set the heating insert in its final position.

7

Precise alignment

The P and C series models can be installed flush with the wall – including with walls that need to be protected. As the ceramic casing on the rear side protrudes by 5 mm over the base plate, a distance of 5 mm from the base plate to the wall must be respected.

5 mm

Base plate

Wall

If the walls are uneven, it must be ensured that the distance between the wall and the rear edge of the base plate is not less than 5 mm at any point.

Remove the skirting boards in the entire stove area.

neocube P / C – Operating and installation instructions

17